02 - YF4P YAMAHA Oxygen Sensor Eliminator Set

02 - YF4P YAMAHA Oxygen Sensor Eliminator Set

02-KA4P YAMAHA Oxygen Sensor Eliminator

02-KA4P YAMAHA Oxygen Sensor Eliminator

02 - KA4P YAMAHA Oxygen Sensor Eliminator

  Improved throttle response, smoother power delivery.
  Supports FI mods such as Power Commander.
  Cheaper than replacing a faulty o2 sensor.
  Simple to fit, No cutting or soldering required.

125 X-MAX 2006-2009, 500 T-MAX 500 2008-2020, 530 T-MAX 530 2012-2020, 600 FZ6 2007-2009, 600 FZ6 R 2010 -15, 600 YZF R6 2006-2016, 850 MT-09 2014-2020, 850 XSR 900 2016-2020, 950 XVS 950 A MIDNIGHT STAR 2009-2019, 1000 FZ1 2006-2014, 1300 FJR 1300 2006-2018, 1300 XVS 1300 A MIDNIGHT STAR 2007-2017, 700 MT-01 2005-2012, NIKEN 2018-2020, 1700 V-Max 1700 2009-2018,

£13.50
Availability: In stock
SKU
02KA4P

The O2 sensor which is installed in the stock exhaust systems of motorcycles are used by the Manufacturer to adjust the fuelling in order to pass the emission tests for street homologation.

This is done only in a very limited RPM range under certain load situations.

The intention behind it is not to improve the performance of the machine.

It's aimed to reduce the emissions of the engine in the specific RPM/Load situations which are tested during the homologation process.

This can result in delayed throttle response or unsteady power delivery. If you replace your silencer or exhaust system or fuelling, it's suggested to remove the installed sensor and replace it with this eliminator.

The eliminator simulates the signal given from the O2 sensor under optimal A/F ratio conditions. This allows the bike to run under best performance conditions. If you install an aftermarket exhaust, remove the catalyst, install a power commander or perform similar modifications we strongly suggest installation of an O2 sensor eliminator for the best performance of your machine.

125

X-MAX 

2006-2009

02 - KA4P

1

M18 x 1.5mm

500

T-MAX 500

2008-2020

02 - KA4P

1

M18 x 1.5mm

530

T-MAX 530

2012-2020

02 - KA4P

1

M18 x 1.5mm

600

FZ6

2007-2009

02 - KA4P

1

M18 x 1.5mm

600

FZ6 R

2010 -15

02 - KA4P

1

M18 x 1.5mm

600

YZF R6

2006-2016

02 - KA4P

1

M18 x 1.5mm

850

MT-09

2014-2020

02 - KA4P

1

M18 x 1.5mm

850

XSR 900

2016-2020

02 - KA4P

1

M18 x 1.5mm

950

XVS 950 A MIDNIGHT STAR

2009-2019

02 - KA4P

1

M18 x 1.5mm

1000

FZ1

2006-2014

02 - KA4P

1

M18 x 1.5mm

1300

FJR 1300

2006-2018

02 - KA4P

1

M18 x 1.5mm

1300

XVS 1300 A MIDNIGHT STAR

2007-2017

02 - KA4P

1

M18 x 1.5mm

1700

MT-01

2005-2012

02 - KA4P

1

M18 x 1.5mm

 

NIKEN

2018-2020

02 - KA4P

1

M18 x 1.5mm

1700

V-Max 1700 

2009-2018

02 - KA4P

1

M18 x 1.5mm

We always recommend removing your o2 sensor and fitting a blanking plug as a non heated o2 sensor can become damaged.