02 - KTM4P Oxygen Sensor Eliminator Set

02 - KTM4P Oxygen Sensor Eliminator Set

02 - KTYF4P KTM Oxygen Sensor Eliminator Set

02 - KTYF4P KTM Oxygen Sensor Eliminator Set

02 - KTYF4P KTM Oxygen Sensor Eliminator

  Improved throttle response, smoother power delivery.
  Supports FI mods such as Power Commander.
  Cheaper than replacing a faulty o2 sensor.
  Simple to fit, No cutting or soldering required.

250 EXC-F SIX DAYS 2007-2020, FREERIDE 250 F 2018-2020, 350 EXC-F SIX DAYS / FACTORY 2007-2020, 450 EXC SIX DAYS / FACTORY 2007-2020, 500 EXC / SIX DAYS 2007-2020, 690 SM SMR SMC 2007-2020, 690 DUKE / DUKE R 2008-2020, ENDURO / ENDURO R 2008-2020,

£12.99
Availability: In stock
SKU
02KTYF4P-KT

The O2 sensor which is installed in the stock exhaust systems of motorcycles are used by the Manufacturer to adjust the fuelling in order to pass the emission tests for street homologation.

This is done only in a very limited RPM range under certain load situations.

The intention behind it is not to improve the performance of the machine.

It's aimed to reduce the emissions of the engine in the specific RPM/Load situations which are tested during the homologation process.

This can result in delayed throttle response or unsteady power delivery. If you replace your silencer or exhaust system or fuelling, it's suggested to remove the installed sensor and replace it with this eliminator.

The eliminator simulates the signal given from the O2 sensor under optimal A/F ratio conditions. This allows the bike to run under best performance conditions. If you install an aftermarket exhaust, remove the catalyst, install a power commander or perform similar modifications we strongly suggest installation of an O2 sensor eliminator for the best performance of your machine.

250 250 EXC-F SIX DAYS 2007-2020 02 - KTYF4P 1 M12 X 1.25mm
250 FREERIDE 250 F 2018-2020 02 - KTYF4P 1 M12 X 1.25mm
350 350 EXC-F SIX DAYS / FACTORY 2007-2020 02 - KTYF4P 1 M12 X 1.25mm
450 450 EXC SIX DAYS / FACTORY 2007-2020 02 - KTYF4P 1 M12 X 1.25mm
500 500 EXC / SIX DAYS 2007-2020 02 - KTYF4P 1 M12 X 1.25mm
690 690 SM SMR SMC 2007-2020 02 - KTYF4P 1 M12 X 1.25mm
690 690 DUKE / DUKE R 2008-2020 02 - KTYF4P 1 M12 X 1.25mm
690 ENDURO / ENDURO R 2008-2020 02 - KTYF4P 1 M12 X 1.25mm

We always recommend removing your o2 sensor and fitting a blanking plug as a non heated o2 sensor can become damaged.