02 - KTYF4P TRIUMPH Oxygen Sensor Eliminator

02 - KTYF4P TRIUMPH Oxygen Sensor Eliminator

02 - KTYF4P KTM Oxygen Sensor Eliminator Set

02 - KTYF4P KTM Oxygen Sensor Eliminator Set

02 - KTYF4P TRIUMPH Oxygen Sensor Eliminator Set

  Improved throttle response, smoother power delivery.
  Supports FI mods such as Power Commander.
  Cheaper than replacing a faulty o2 sensor.
  Simple to fit, No cutting or soldering required.

1190 ADVENTURE 2013-2016, 1090 ADVENTURE 2017-2019, 1050 ADVENTURE 2015-2020, 1290 SUPER DUKE 2014-2020, 1290 SUPER ADVENTURER 2015-2020, 865 SPEEDMASTER 865 2007-2015, 900 SCRAMBLER 900 2006-2016, 900 STREET TWIN 900 2016-2020, 900 THRUXTON 900 2008-2015, 900 STREET SCRAMBLER 2016-2020, 1200 THRUXTON 1200 / R 2016-2020, 1200 BONNEVILLE T120 2016-2020, 1200 BONNEVILLE BOBBER T120 2016-2020, 1200 STREET CUP 1200 2016-2019, 1200 SCRAMBLER XC 2019-2020, 1200 SPEED TWIN 1200 2019-2020, 1200 SPEEDMASTER 1200 2018-2020, 1600 THUNDERBIRD 1600 2008-2017, 1700 THUNDERBIRD 1700 STORM 2011-2017, 865 BONNEVILLE AMERICA 2008-2015, BONNEVILLE T100 2008-2016

£23.99
Availability: In stock
SKU
02KTYF4P-T-SET

The O2 sensor which is installed in the stock exhaust systems of motorcycles are used by the Manufacturer to adjust the fuelling in order to pass the emission tests for street homologation.

This is done only in a very limited RPM range under certain load situations.

The intention behind it is not to improve the performance of the machine.

It's aimed to reduce the emissions of the engine in the specific RPM/Load situations which are tested during the homologation process.

This can result in delayed throttle response or unsteady power delivery. If you replace your silencer or exhaust system or fuelling, it's suggested to remove the installed sensor and replace it with this eliminator.

The eliminator simulates the signal given from the O2 sensor under optimal A/F ratio conditions. This allows the bike to run under best performance conditions. If you install an aftermarket exhaust, remove the catalyst, install a power commander or perform similar modifications we strongly suggest installation of an O2 sensor eliminator for the best performance of your machine.

1190

1190 ADVENTURE

2013-2016

02 - KTYF4P

2

M12 X 1.25mm

1090

1090 ADVENTURE

2017-2019

02 - KTYF4P

2

M12 X 1.25mm

1050

1050 ADVENTURE

2015-2020

02 - KTYF4P

2

M12 X 1.25mm

1290

1290 SUPER DUKE

2014-2020

02 - KTYF4P

2

M12 X 1.25mm

1290

1290 SUPER ADVENTURER

2015-2020

02 - KTYF4P

2

M12 X 1.25mm

865

SPEEDMASTER 865

2007-2015

02 -KTYF4P

2

M12 x 1.25mm

900

SCRAMBLER 900

2006-2016

02 - KTYF4P

2

M12 x 1.25mm

900

STREET TWIN 900                            

2016-2020

02 - KTYF4P

2

M12 x 1.25mm

900

THRUXTON 900

2008-2015

02 - KTYF4P

2

M12 x 1.25mm

900

STREET SCRAMBLER                      

2016-2020

02 - KTYF4P

2

M12 x 1.25mm

1200

THRUXTON 1200 / R                           

2016-2020

02 - KTYF4P

2

M12 x 1.25mm

1200

BONNEVILLE T120                              

2016-2020

02 - KTYF4P

2

M12 x 1.25mm

1200

BONNEVILLE BOBBER T120              

2016-2020

02 - KTYF4P

2

M12 x 1.25mm

1200

STREET CUP 1200                             

2016-2019

02 - KTYF4P

2

M12 x 1.25mm

1200

SCRAMBLER XC

2019-2020

02 - KTYF4P

2

M12 x 1.25mm

1200

SPEED TWIN 1200

2019-2020

02 - KTYF4P

2

M12 x 1.25mm

1200

SPEEDMASTER 1200

2018-2020

02 -KTYF4P

2

M12 x 1.25mm

1600

THUNDERBIRD 1600

2008-2017

02 - KTYF4P

2

M12 x 1.25mm

1700

THUNDERBIRD 1700 STORM

2011-2017

02 - KTYF4P

2

M12 x 1.25mm

865

BONNEVILLE AMERICA

2008-2015

02 - KTYF4P

2

M12 x 1.25mm

 

BONNEVILLE T100

2008-2016

02 - KTYF4P

2

M12 x 1.25mm

We always recommend removing your o2 sensor and fitting a blanking plug as a non heated o2 sensor can become damaged.