02 - TWM4P TRIUMPH Oxygen Sensor Eliminator

02 - TWM4P TRIUMPH Oxygen Sensor Eliminator

02 - KTYF4P TRIUMPH Oxygen Sensor Eliminator Set

02 - KTYF4P TRIUMPH Oxygen Sensor Eliminator Set

02 - KTYF4P TRIUMPH Oxygen Sensor Eliminator

  Improved throttle response, smoother power delivery.
  Supports FI mods such as Power Commander.
  Cheaper than replacing a faulty o2 sensor.
  Simple to fit, No cutting or soldering required.

800 TIGER XC 800 2010-2020, 675 DAYTONA 675/675R 2006-2018, 675 STREET TRIPLE 675 2008-2017, 765 STREET TRIPPLE 765 RS /R /S 2017-2020, 1050 SPEED TRIPLE 1050 2007-2020, 1050 SPRINT GT 1050 ALL, 1050 SPRINT ST 1050 2007-2018, 1050 TIGER 1050 2007-2018, 1200 TIGER EXPLORER 1200 2012-2020, 1215 TROPHY 1215 2012-2017

£12.99
Availability: In stock
SKU
O2 - KTYF4P

The O2 sensor which is installed in the stock exhaust systems of motorcycles are used by the Manufacturer to adjust the fuelling in order to pass the emission tests for street homologation.

This is done only in a very limited RPM range under certain load situations.

The intention behind it is not to improve the performance of the machine.

It's aimed to reduce the emissions of the engine in the specific RPM/Load situations which are tested during the homologation process.

This can result in delayed throttle response or unsteady power delivery. If you replace your silencer or exhaust system or fuelling, it's suggested to remove the installed sensor and replace it with this eliminator.

The eliminator simulates the signal given from the O2 sensor under optimal A/F ratio conditions. This allows the bike to run under best performance conditions. If you install an aftermarket exhaust, remove the catalyst, install a power commander or perform similar modifications we strongly suggest installation of an O2 sensor eliminator for the best performance of your machine.

800

TIGER XC 800

2010-2020

02 - KTYF4P

1

M12 x 1.25mm

675

DAYTONA 675/675R

2006-2018

02 - KTYF4P

1

M12 x 1.25mm

675

STREET TRIPLE 675

2008-2017

02 - KTYF4P

1

M12 x 1.25mm

765

STREET TRIPPLE 765 RS /R /S

2017-2020

02 - KTYF4P

1

M12 x 1.25mm

1050

SPEED TRIPLE 1050

2007-2020

02 - KTYF4P

1

M12 x 1.25mm

1050

SPRINT GT 1050

ALL

02 - KTYF4P

1

M12 x 1.25mm

1050

SPRINT ST 1050

2007-2018

02 - KTYF4P

1

M12 x 1.25mm

1050

TIGER 1050

2007-2018

02 - KTYF4P

1

M12 x 1.25mm

1200

TIGER EXPLORER 1200

2012-2020

02 - KTYF4P

1

M12 x 1.25mm

1215

TROPHY 1215

2012-2017

02 - KTYF4P

1

M12 x 1.25mm

We always recommend removing your o2 sensor and fitting a blanking plug as a non heated o2 sensor can become damaged.